Weber Weberfloor Fibre 4310 Self-Smoothing Levelling Compound 25kg

Order in the next {{data.days}} day, {{data.hours}} hour, {{data.minutes}} minute and {{data.seconds}} second Last chance for {{data.day}} delivery*

FREE UK Delivery On orders over £250net*

Need some help? Call us on 0330 320 1223

Weber Weberfloor Fibre 4310 Self-Smoothing Levelling Compound 25kg

by Weber

A Self-Smoothing Base & Renovation Screed

Can Be Applied To Depths Of 5-50mm

Suitable For Use In Residential & Commercial Areas

Light Foot Traffic After 2-4 Hours

Weber Low Dust Technology

Size: 25kg Bag

Coverage Example: 2.7m² @ 5mm Depth Per 25kg Bag

Product Code	Price	Quantity
55530002	£26.39 INC VAT £21.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Flooring Materials Ltd can't be held responsible for any under ordering.

Description

Weberfloor Fibre 4310 is a self-smoothing base and renovation screed — also referred to as a self-levelling compound or self-levelling screed — which can be applied to depths of 5-50mm used for levelling:
- Concrete.
- Sand/cement screeds.
- Anhydrite screeds.
- Wooden boards.
- Underfloor heating/warming.
- Insulation boards.
- Existing tiles.
- Bitumen.

Weberfloor Fibre 4310 is suitable for covering with:
- Tiles.
- Timber laminate.
- Vinyl/ Linoleum.
- Carpet.
- Laminate flooring.
- Parquet flooring*.

Suitable for use in residential and commercial areas, light foot traffic is possible after 2-4 hours in normal conditions, tiling is possible after 12 hours and final floor coverings other than tiles can be installed in as little as 3 days, depending on layer thickness and site conditions.

* May require extended time before covering.

Features & Benefits:
- For application depths between 5-50mm.
- Weber Low Dust TechnologyTM improves the comfort of applicators.
- Pump or hand applied.
- Rapid drying.
- Foot traffic after 2-4 hours.
- Tile after 12 hours.
- Final floor covering installed in as little as 3 days, depending on layer thickness and site conditions.
- Fibre modified for added durability.
- Low alkalinity.
- Casein-free.
- Low emissions.

Attachments

Weberfloor Fibre 4310 Technical Data Sheet.pdf
Weberfloor Fibre 4310 Safety Data Sheet.pdf
Weberfloor Fibre 4310 EPD Data Sheet.pdf

Specification

Temperature Of Application: +10°C to +25°C.
Minimum Substrate Strength: 1N/mm².
Minimum Thickness: 5mm.
Minimum Thickness (underfloor heating): >15mm over the heating pipes.
Minimum Thickness (over slip membrane solid substrate): 20mm.
Minimum Thickness (floating floor): 25mm (with Weberfloor 4945 fibre mesh).
Maximum Thickness: 50mm.
Water Addition: 5 litres/25kg (20%).
Compressive Strength: C 25.
Flexural Strength: F 6.
Shrinkage (28 day): < 0.05%.
Flow Rate: 220-235mm.
Approx. Material Consumption: 1.7kg/m²/mm.
Hardening Time (before foot traffic): 2-4 hours in normal conditions.
Hardening Time (before final covering): Floor covering can be installed in as little as 3 days, depending on layer thickness and site conditions.
Pot life: 20 Mins.
Storage &Shelf-Life: When stored unopened in a cool, dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.

Weber Weberfloor Fibre 4310 Self-Smoothing Levelling Compound 25kg Half Pallet (20 Bags Tail Lift)

£527.76 INC VAT

£439.80 EX VAT

Weber Weberfloor Fibre 4310 Self-Smoothing Levelling Compound 25kg Full Pallet (40 Bags Tail Lift)

£1055.52 INC VAT

£879.60 EX VAT