by Mapei
A Solvent-Free, Non-Staining Acrylic-Based Adhesive
Designed To Provide A Permanently Tacky Film When Dry
Suitable For Use Over Underfloor Heating Systems
For Interior Use Only
Size: 15kg Tub
Coverage: Up To 300m² Per 15kg Tub
| Product Code | Price | Quantity |
|---|---|---|
| 3585915 |
£105.59 INC VAT £87.99 EX VAT |
|
A solvent-free, non-staining acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required. It can also be used to prevent loose-lay LVT, textile floorings and carpet underlayments from slipping or moving. For interior use only.
Some Application Examples:
• Use Ultrabond Eco Tack TX+ for bonding carpet tiles backed with PVC, polypropylene, fibre-backed bitumen and other polymer backings. Suitable for concrete, cementitious screeds, raised access floor panels, asphalt, terrazzo, plywood, smoothing compounds and some existing floor coverings.
• Ultrabond Eco Tack TX+ is also suitable for use over underfloor heating systems (surface temperature must not exceed British Standard recommendations). The heating should be switched off at least 48 hours before and after the installation of floor covering. In areas subject to excessive variations of temperature, and floor coverings not completely dimensionally stable, care should be taken as movement may occur causing gaping.
Consistency: Liquid.
Colour: White/Transparent.
Density (g/cm³): 1.00.
Dry Solid Content: 60.
EMICODE: EC1 Plus - very low emission.
Blauer Engel: DE-UZ 113. For further information refer to the Safety Data Sheet.
Application Temperature Range: From +15°C to +35°C.
Waiting Time: 10-20 minutes. The installation should be carried out once the adhesive has become transparent (in any case within 12 hours).
Ready For Use: Immediately after installation.
Coverage: Up To 300m² Per 15kg Tub
Storage & Shelf Life: The shelf life of Ultrabond Eco Tack TX+ is 12 months if stored in its original unopened packaging. Protect from Frost.
